What will you do with the money you save?
866-3DENTAL
(866-333-6825)

Filtek Z250 Syringe - 3M ESPE

3M ESPE Filtek Z250 Universal Restorative has been used in over a million restorations worldwide. Based on reliable hybrid technology it is ideally suited for convenient single-shade restorations in the anterior and especially in the posterior region.
Manufacturer: 3M ESPE
Item# Size/Type Price Quantity
1370A1 Filtek Z-250 Syringe - 3M/ESPE Shade A1
$44.95
$28.95
1370A2 Filtek Z-250 Syringe - 3M ESPE Shade A2
$44.95
$28.95
1370A3 Filtek Z-250 Syringe - 3M ESPE Shade A3
$44.95
$28.95
1370A3.5 Filtek Z-250 Syringe - 3M ESPE Shade A3.5
$44.95
$28.95
1370A4 Filtek Z-250 Syringe - 3M ESPE Shade A4
$44.95
$28.95
1370B1 Filtek Z-250 Syringe - 3M ESPE Shade B1
$44.95
$28.95
1370B2 Filtek Z-250 Syringe - 3M ESPE Shade B2
$44.95
$28.95
1370B3 Filtek Z-250 Syringe - 3M ESPE Shade B3
$44.95
$28.95
1370C2 Filtek Z-250 Syringe - 3M ESPE Shade C2
$44.95
$28.95
1370D3 Filtek Z-250 Syringe - 3M ESPE Shade D3
$44.95
$28.95

PRODUCT INFORMATION

  • Filtek Z250 has remarkable wear resistance, excellent fracture toughness and overall strength mean you can be confident of long-lasting restorations.
  • Excellent handling characteristics defined by dentists for easy use:
  • Filtke Z-250 offers outstanding resistance to slumping to allow for easy occlusal contouring prior to curing, flow and viscosity suitable for all restorations, and its acceptable stickiness saves time struggling with pull backs.
  • Filtek's Fast placement technique saves time: it takes only 20 seconds to cure an increment of 2.5mm for all shades except UD, C4 and B0.5 which require a 30-second cure for a 2mm increment.
  • The next generation in lifelike results with a smaller average particle size than other products.

Dental Advisor

3M™ ESPE™ Filtek™ Z250 Universal Restorative was granted the highest award (5 Plus Rating) by the Dental Advisor (Zitat) for very good mechanical properties, excellent aesthetics, and long-term durability. To assess the performance of Filtek Z250 universal restorative, 565 restorations were placed in 269 patients.

Results: Filtek Z250 universal restorative showed over the nine years of evaluation time consistently high ratings for resistance to fracture, aesthetics, resistance to marginal discoloration and wear.

MSDS

3M AUSTRALIA PTY LIMITED 3M NEW ZEALAND LTD Building A, 1 Rivett Road 94 Apollo Drive, Albany North Ryde NSW 2113 Auckland, 0632 Phone: 136 136 Phone: (9) 477 4040 24HR EMERGENCY: 1800 097 146 (Australia only), 0800 764 766 (New Zealand only) ============================================================================ MATERIAL SAFETY DATA SHEET ============================================================================ Document ID : 22-6912-4 Issue date : 22/05/2013 Version : 2.00 Supersedes date : 24/04/2008 Document status : Issued This MSDS has been prepared by 3M Australia Pty Ltd Toxicology Dept. ---------------------------------------------------------------------------- 1 PRODUCT AND COMPANY IDENTIFICATION ---------------------------------------------------------------------------- PRODUCT NAME 4711/4712 and 4771/4772 3M(TM) ESPE(TM) FILTEK SILORANE LOW SHRINK POSTERIOR RESTORATIVE DIVISION EF - 3M ESPE Dental Products 3M Product ID 70-2010-5371-0, 70-2010-5372-8, 70-2010-5373-6, 70-2010-5366-0, 70-2010-5367-8, 70-2010-5368-6, 70-2010-5369-4, 70-2010-5370-2 RECOMMENDED USE: Dental Product. For use only by dental professionals. ---------------------------------------------------------------------------- 2 HAZARDS IDENTIFICATION ---------------------------------------------------------------------------- NOTE: NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. POISONS SCHEDULE This product has not been assessed for poisons scheduling as the product is intended for professional use only. ---------------------------------------------------------------------------- 3 COMPOSITION ---------------------------------------------------------------------------- Ingredient Name CAS number Percentage ------------------------------------- ------------------ ------------- SILANE TREATED QUARTZ 100402-89-9 60 - 70 YTTRIUM TRIFLUORIDE 13709-49-4 5 - 15 BIS-3,4-EPOXYCYCLOHEXYLETHYL-PHENYL- 154265-59-5 5 - 15 METHYLSILANE 3,4- --- 5 - 15 EPOXYCYCLOHEXYLCYCLOPOLYMETHYLSILOXANE MIXTURE OF OTHER BY-PRODUCTS Mixture < 5 MIXTURE OF EPOXY-MONO-SILANOLE BY- Mixture < 5 PRODUCTS MIXTURE OF EPOXYFUNCTIONAL DI- AND OLIGO-Mixture < 5 SILOXANE BY-PRODUCTS MIXTURE OF ALPHA-SUBSTITUTED BY-PRODUCTSMixture < 5 BORATE(1-), TETRAKIS(PENTAFLUOROPHENYL)-178233-72-2 < 1 [4-(METHYLETHYL)PHENYL](4-METHYLPHENYL) IODONIUM ---------------------------------------------------------------------------- 4 FIRST AID MEASURES ---------------------------------------------------------------------------- EYE CONTACT Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. SKIN CONTACT Remove contaminated clothing and shoes. Wash affected area with soap and water. If signs/symptoms develop, get medical attention. Wash contaminated clothing and shoes before reuse. INHALATION If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist, get medical attention. IF SWALLOWED Do not induce vomiting unless instructed to do so by medical personnel. Give person two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. ---------------------------------------------------------------------------- 5 FIRE FIGHTING MEASURES ---------------------------------------------------------------------------- SUITABLE EXTINGUISHING MEDIA Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). FIRE FIGHTING PROCEDURES Wear full protective equipment (Turnout Gear) and a self-contained breathing apparatus (SCBA). Combustion Products from Fire Combustion Products from Fire are listed in Section 10, STABILITY AND REACTIVITY. Unusual Reaction Hazard None Special Instructions for Fire Fighting Not applicable. ---------------------------------------------------------------------------- 6 ACCIDENTAL RELEASE MEASURES ---------------------------------------------------------------------------- Personal Precautions Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate area with fresh air. Environmental Procedures Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible. Methods for cleaning up Observe precautions from other sections. Clean up residue with an appropriate solvent selected by a qualified person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. ---------------------------------------------------------------------------- 7 HANDLING AND STORAGE ---------------------------------------------------------------------------- Incompatibility - Materials to Avoid Store away from heat. Store out of direct sunlight. Store away from oxidising agents. Precautions for Safe Handling Avoid eye contact. Avoid skin contact. Do not ingest. Wash hands after handling and before eating. Avoid contact with oxidising agents. Conditions for Safe Storage Store away from areas where product may come into contact with food or pharmaceuticals. ---------------------------------------------------------------------------- 8 EXPOSURE CONTROLS/PERSONAL PROTECTION ---------------------------------------------------------------------------- Special Information, Exposure/Protection The extent to which the following recommendations for exposure control and protection are observed should depend on the risk assessment undertaken for the specific conditions under which this product is used, including occupational hygiene measurements. Eye Protection Select and use eye protection in accordance with AS/NZS 1336. Eye protection should comply with the performance specifications of AS/NZS 1337. Avoid eye contact. The following should be worn alone or in combination, as appropriate, to prevent eye contact: Safety glasses with side shields. Skin Protection Avoid skin contact. Avoid prolonged or repeated skin contact. Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Prevention of Accidental Ingestion Do not ingest. Wash hands after handling and before eating. Recommended Ventilation Use in an enclosed process area is recommended. Use in a well ventilated area. Do not use in a confined area or areas with little or no air movement. ---------------------------------------------------------------------------- 9 PHYSICAL/CHEMICAL PROPERTIES ---------------------------------------------------------------------------- Appearance and Odour Solid. Paste. Tooth coloured paste pH Not applicable Boiling point Not applicable Melting point Not determined Flash point Not applicable Autoignition temperature Not applicable Vapour pressure Not determined Water Solubility NIL Specific gravity 1.8 - 2 (Water=1) Vapour density Not determined Volatile organic compounds (VOC) Not determined content Evaporation rate Not determined Viscosity Not determined Flammable Limits - LEL Not applicable Flammable Limits - UEL Not applicable ---------------------------------------------------------------------------- 10 STABILITY AND REACTIVITY ---------------------------------------------------------------------------- Materials to Avoid Strong Oxidising Agents. Conditions to Avoid Heat. Light. Hazardous Decomposition Products None known during combustion. Stability Hazardous polymerisation will not occur. Stable. This material may be reactive with certain agents under certain conditions - see the other headings in this section. ---------------------------------------------------------------------------- 11 TOXICOLOGICAL INFORMATION ---------------------------------------------------------------------------- Effects from Eye Contact Vapours released during curing may cause eye irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Contact with the eyes during product use is not expected to result in significant irritation. Effects from Skin Contact Allergic Skin Reaction (non-photo induced): Signs/symptoms can include redness, swelling, blistering and itching. Mild Skin Irritation: Signs/symptoms may include localised redness, swelling, and itching. Effects from Inhalation Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Exposures needed to cause the following health effect(s) are not expected during normal, intended use: Silicosis: Signs/symptoms may include breathlessness, weakness, chest pain, persistent cough, increased amounts of sputum, and heart disease. Effects from Ingestion May be absorbed following ingestion and cause target organ effects. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea. Carcinogenicity Exposures needed to cause the following health effect(s) are not expected during normal, intended use: Contains a chemical or chemicals which can cause cancer. Other Toxicological Information This product has been evaluated for biocompatibility and determined to be safe for its normal, intended use in patients. Exposures needed to cause the following health effect(s) are not expected during normal, intended use: Hard Tissue Effects: Signs/Symptoms may include colour changes in the teeth and nails, changes in development of bone, teeth or nails, weakening of the bones and hair/or loss. ---------------------------------------------------------------------------- 12 ECOLOGICAL INFORMATION ---------------------------------------------------------------------------- Ecotoxicity Data Not determined. Ecofate Data Not determined. Additional Ecological Information One or more components of this product have significant known or predicted environmental hazards, but a conservative assessment indicates a low environmental risk. Intended use and proper disposal are unlikely to cause the environmentally hazardous component(s) to enter the environment in quantities or by routes that could cause the adverse environmental impacts. ---------------------------------------------------------------------------- 13 DISPOSAL CONSIDERATIONS ---------------------------------------------------------------------------- Product as Sold Dispose of completely cured (or polymerised) wastes in a sanitary landfill. As a disposal alternative, incinerate in an industrial or commercial facility. ---------------------------------------------------------------------------- 14 TRANSPORT INFORMATION ---------------------------------------------------------------------------- ADG (Road/Rail) --------------- UN NUMBER NONE ALLOCATED PROPER SHIPPING NAME NONE ALLOCATED DANGEROUS GOODS CLASS NONE ALLOCATED SUBSIDIARY RISK NONE ALLOCATED PACKING GROUP NONE ALLOCATED IATA (Airfreight) ----------------- UN NUMBER NONE ALLOCATED PROPER SHIPPING NAME NONE ALLOCATED DANGEROUS GOODS CLASS NONE ALLOCATED SUBSIDIARY RISK NONE ALLOCATED PACKING GROUP NONE ALLOCATED IMDG (Seafreight) ----------------- UN NUMBER NONE ALLOCATED PROPER SHIPPING NAME NONE ALLOCATED DANGEROUS GOODS CLASS NONE ALLOCATED SUBSIDIARY RISK NONE ALLOCATED PACKING GROUP NONE ALLOCATED IMDG SPECIAL INSTRUCTIONS: ---------------------------------------------------------------------------- 15 REGULATORY INFORMATION ---------------------------------------------------------------------------- Product Certifications Listed on ARTG ---------------------------------------------------------------------------- 16 OTHER INFORMATION ---------------------------------------------------------------------------- REASON FOR REISSUE Initial Issue. The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date of issue. 3M MAKES NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY, (UNLESS REQUIRED BY LAW) OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluates the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to customers. Due to the remote possibility of electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M. 3M MSDSs are available at www.3M.com.au

Related Products